roducts should be installed on request, on the correct installation in the diesel engine or diesel engine on subsidiary stent (such as automobile frame). when the ignition key lock in the open position (ON position), wire rope extended, so that the pump handle to stop the oil supply reduction, diesel engines can run a normal startup. when the ignition key lock at the location of close position (OFF position), wire rope indented, pulling the handle so that the oil pump stopped diesel oil engine stopped.
The "Red line" to connect the battery positive (regular power supply); "Green Line" to connect switch ON the ignition lock file; "Black line" to connect the battery negative (Ground); "Yellow line" to connect switch of the START or Y file (pre-file). Note: ① When the ignition key lock file or Y at START file, ON constant electric file, then can not take the yellow line. ② certain vehicle lines, the response of the battery charge status output excitation coil and the entire instrument without reverse diode circuit, the action of the products have interference lines in the vehicle need to add design (as shown).
接线图Wiring diagram
车用柴油机用电熄火器接线图
柴油发电机组用电熄火控制器接线图
Diesel engine electric generator set controller wiring diagram
Installation, wire rope to indent status, allocated to pump off the handle off position, a fixed rope; If the idle speed control products for the selection of factory production to be slow off (idle) controller to control the end products (Green Line) power, the status of indentation in the wire rope, adjusting the throttle lever to achieve the required speed diesel engine and then fixed.
Note: Green Line power off device when the wire rope indentation, the same principle as quickly slow, idle speed controller for the power of this job, if users need to power job, the company can provide. The yellow line are not need.
基本技术参数Basic technical parameters
额定电压
Working voltage
DC12V工作电流≤2.5A；DC24V工作电流≤1.6A
DC12VRated current ≤ 2.5A; DC24V Working current ≤ 1.6A
1, a small current job: 85N when driving at, 24V flame Current ≤ 1.6A, 12V flame Current ≤ 2.5A, there is no need for the installation of vehicle control in high-current line relays.
2, long service life: Normal use of the circumstances under which the work of more than 50,000 circulation, stop the oil off the working hours of ≤ 1.5 second, and the rest of the time, was not automatically turn off the power status job.
3, small size and ease of installation: can be directly installed in the fuel pump on, but also the installation of flexible shaft and the wire rope assembly, select the appropriate location to install.
4, material well: shell material has high strength, high hardness, flame retardant, antifreeze, anti-shock, anti-aging and so on.
5, a technology leader: with non-contact switches and over-current protection circuit.
6, cheap, applicable to a wide range: the price is much lower than the market to stop the use of substantial oil solenoid valve, which reduces the use of factory production costs. Applicable to all types of automotive diesel engines and diesel generating sets.
7, with the electromagnetic valve devices compared to the advantages of flame: flame failure device-type solenoid valve large current job (20 ~ 25A), diesel engine running at 2-3A when the maintenance of current products in a long time job status, vulnerable to heat Products and burned; of action such as frequent, it will seriously affect the life of the battery; flameout solenoid valve type of connection devices for steel and the working hours of action for the moment, the mechanical impact of the oil major. Shell easy to rust corrosion products, the impact of product life. Products to improve the above deficiencies.
